HP FAX-700 manual Connecting to the Telephone Line

Connecting to the Telephone Line

Note For best performance, the phone line should be connected directly to the

Your fax machine is not designed for use in a phone system that has call wait extensions, caller ID, voice-mail, modems or roll-over lines. Use of a phone li extensions may cause transmission and/or reception problems if any of the e up during data transmission/reception. If problems occur, consider using a d for the fax machine.

Your fax machine may have plastic pull tabs protecting the telephone and l back of the machine. Carefully twist and pull the tabs out of the slots to a

Connecting the HP FAX-700 and FAX-750 to the Telephone Line

To connect the HP FAX-700 or HP FAX-750 to the telephonerformline, the following procedure:

1.Connect a telephone line from the phone wall jack to the LINE connector on the back of Figure 2-38. An HP FAX-700 is illustrated in Figure 2-38, but the method of connection to the te is the same for the HP FAX-750.

750-48

Figure 2￿38.￿ Connecting￿ the￿ HP￿ FAX￿750￿ to￿ the￿ Telephone￿ Line

2.Connect the fax machine to a source of ac power.

To set up the appropriate mode of reception, refer to the information under the heading “Man Setting the Reception Mode on the HP FAX-700 and FAX-750” given later in this chapter. The mode of depends on the devices you have connected to your fax.

Installation and Configuration 2￿27