HP FAX-700 manual Service Menu 01 Service Parame, Ote

Changing Service Parameters on the HP FAX-700 and FAX-750 (Test Mode 5)

￿aution	Do not change any service parameter setting unless recommended in a trou
	cedure or by HP Customer Support Center personnel.

To change service parameterpresssettings,he buttons and follow the procedure below:

Press & hold

down the →

Stop button

0 →

Menu

→	Release the Stop
	→
	and Menu buttons

X 4

7 →

0 →

The following message will be on the front panel LCD:

Service Menu (01 – 12)

05: Service Parame

Press the Enter button and either enter the number of the parameter you want to change using the up or down arrow button.

Once you are at the parameter you want to change, press the Enter button. Then change th you will need to use the horizontal arrow buttons to change the parameter, and, in other type a number. In every case, you will need to press the Enter button after changing the pa effective.

Once the Enter button is pressed to make your change effective, the fax machine will retu level, and you can either browse to a new parameter and change it or press the Stop button menu level or twice to return the fax machine to the standby state.

Service parameters and their settings are .listed in Table 5-2

￿ote	Values given in the table for Current Setting are fictitious and for example
	parameter description is given, none was available.

5￿20 Problem Resolution