HP FAX-700 manual Cauto

Test Mode 1 (Changing Function Parameters) on the HP FAX-900 and FAX-950

The use of test mode 1 to change function parameters has already been described in this ch heading, “Changing the Function Parameters on the HP FAX-900 and FAX-950 (Test Mode 1).”

Test Mode 3 (Listing Function Parameter Settings) on the HP FAX-900 and FAX-950

The use of test mode 3 to produce a list of function parameters has already been described heading, “Listing the Function Parameter Settings on the HP FAX-900 and FAX-950 (Test Mode 3).”

Test Mode 4 and Test Mode 5 (Factory Only) on the HP FAX-900 and FAX-950

These modes are used for factory or repair center testing.

Test Mode 6 (Initializing Fax Machine Memory) on the HP FAX-900 and FAX-950

Use test mode 6 to initialize the fax machine memory or to initialize the function parameter Procedures for accomplishing initialization follow.

Caut￿o￿	Do notinitialize the fax machine RAMANUFACTUREto the “ SET	” setting. Doing so will
	render the machineunusable.

To initialize the HP FAX-900 or FAX-950,perform the following procedure:

Menu

→

PRS

7 →

Dial/Space

x 4 →

Tone

L →

MNO

6 →

Start

Start Stop

→

Note: It is possible to enter a code from Table 5-32 in order to initialize RAM data instead of pressing￿ or￿￿to select the data to be initialized. The fax machine will immediately initialize after the last digit of the code is pressed.

Ex￿t￿ Note If, after cycling through the choices of RAM data to be initialized, you decide n of the choices, press the stop button twice to exit test mode 6 and return th standby mode.

1.With the fax machine in standby mode (message window showing date and time), press Me

2.With the message window showing SET MODE NO. =, press Dial/Space four times. The unit sounds beep each time you press Dial/Space. This is normal.

Problem Resolution 5￿65