Shared Reception Mode on the HP FAX-900 and FAX-950

To enable Remote Reception and/or enter a newpressceptionthe buttonscode, in the sequence shown and the information as indicated.

→

Stop

→

			Enter						Enter
6		→			→	9	→				→

	Enter			Type new				Enter
→			→	Type new						→
→			→	Reception →						→
				Code
				Code

Most answering machines can be used with your fax machine. However, the following answe cannot be used when the answering machine is connected to your fax machine:

DDo not use the remote turn-on feature of an answering machine

DDo not use the outgoing-message only feature of an answering machine

DYour answering machine must be set to answer in less than eight rings

Shared Reception Mode on the HP FAX-900 and FAX-950

Telephone answering machine interface ismodealsoreceptionknown as shared reception mode. If you w receive both voice telephone calls and fax calls on the same line, or have your fax take machine take voice calls, you will need to set the fax machine for telephone answering m mode. The answering machine will accept, play and record voice calls. If a fax call is recei passes the answering machine to receive the fax message.

In this mode, the answering machine will answer all calls. While your outgoing message re machine is playing, the fax machine is monitoring the line for a fax tone signal. If a fax to chine automatically takes over the call to receive the fax. If a fax tone is not detected, t and records the incoming message.

Note	Due to telecommunications regulations, the telephone answering machine i
	used in France.

The remote reception feature of your HP FAX-950 allows you to still receive a fax call if you’ phone, attached to the answering machine, before the answering machine starts its outgo ceive the fax calls, you must first set fax parameter 47 to option 2 (valid). Refer to the informa chapter 4.

To use telephone answering machine (TAM I/F) mode, makereceptionsure the Receive mode button is set to (the lamp is lit) and you do not have any document in the automatic document feeder of y

If you have not already set fax parameter 16 to option 2 (TAM I/F), do so now. Press the buttons in t

→