HP FAX-700 manual Ring DET. Count

Table 5-7. HP FAX-900 and FAX-950 Function Parameters (Continued)

No.	Parameter	Selections		Function
45	RING DET. COUNT	1	= 1 ring	Selects a ring detect count from 1 to
	(2)	.		9 times in one-step intervals
		.
		9	= 9 rings
46	ON-HOOK TIME	0	= 0 sec	Selects on-hook time between se-
	(5 sec)	.		quential communication calls from 0
		.		to 90 seconds in 1 second steps
		90 = 90 sec
47	RESPONSE WAIT	1	= 1 sec	Selects waiting time to respond after
	(65 sec)	.		finishing the dialing in 1 second steps
		.
		90 = 90 sec
48	EXT. TEL DIAL	1	= Invalid	Selects whether or not key pad dial is
	(Invalid)	2	= Valid	available when the external phone is
				off-hook
49	Not Used
50	RING DET. MODE	1	= Normal	Selects seriousness of ringer detec-
	(Normal)	2	= Rough	tion. If the line signal is “noisy”, set to
				Rough so the machine will be more
				likely to detect signals
51	TONE DET. MODE	1	= Normal	Selects seriousness of dial tone and
	(Normal)	2	= Rough	busy tone detection. If the line signal
				is “noisy”, set to Rough so the ma-
				chine will be more likely to detect sig-
				nals
52	PULSE RATE	1	= 10 pps	Selects the dial pulse rate
	(10 pps)	2	= 20 pps
53-54 Not Used in U.S.
55	BUSY TONE CHECK	1	= Off	Selects busy tone detection function
	(On)	2	= On
56-57 Not Used in U.S.
58	Not Used
59	CONF. RCV REPORT	1	= Off (not printed out)	Selects whether or not CONF. RCV
(FAX-950	(On)	2	= On (printed out)	REPORT is printed
Only)
60	VERSION			Indicates the machine type (900 or
				950) and the ROM version in the
				message window
61	TX/RX/PRT	TX/RX/PRINT		Indicates the transmitted, received
	COUNTER			and printed document count
62-63	Not Used
64	SILENT DET. T. OUT	00 = 0 sec		Select silent detection timeout time
	(60 sec)	.		(TAM I/F)
		.
		99 = 99 sec

Problem Resolution 5￿39