Loading Paper into the HP FAX-900 and FAX-950 Fax Machines

Before loading paper into the paper supply tray of the HP FAX-900 or FAX-950 fax machine the pap must be properly adjusted for media size. PerformPaperthe procedureSupply TraytitlMedia Size Setting (HP

FAX-900 and FAX-950) in this guide.

To load paper into the paper supperformly drawer,the following procedure:

1.Insert the paper tray firmly into the fax machine paper supply slot, so that the side s

2.Take out a 1/2-inch (12.7 mm) stack of paper (about 100 sheets) and tap the paper edges on a f “even” the stack. See Figure 2-19.

3.Pull the paper supply tray extender out from the front of the machine to its maximum

Extender

FAX900–8

Figure 2￿21.￿ Pulling￿ Out￿ the￿ Paper￿ Tray￿ Extender

Note

Load the paper with the printfacesideupin the paper supply. The paper packaging will

 

indicate printthe side.

4.Slide the stack of paper all the way into the paper supply tray until it rests against

Note

If the paper size you are using does not fit into the paper supply tray, the tra

 

correctly adjusted for the paper size being used. Refer to the paper supply tr

 

given under thePapertitle,Supply Tray Media Size Setting (HP FAX-900 and FAX-950)

 

earlier in this chapter.

5.Push the paper supply tray extender into the machine until it rests against the front

2￿16 Installation and Configuration

Page 41
Image 41
HP FAX-700 manual Loading Paper into the HP FAX-900 and FAX-950 Fax Machines, Earlier in this chapter