HP FAX-700 manual Paper Guide/Roller Assembly

Models: FAX-700

1 292
Download 292 pages 51.46 Kb
Page 132
Image 132

To clean the metal Paper Guide/RollerperformAssembly,the following procedure:

See Figure 3-19 for a drawing of the Paper Guide/Roller Assembly.

Warning

The metal Paper Guide/Roller Assembly has sharp edges that could cause injur

 

cleaning this item. Print out all faxes that are stored in memory before proc

 

assumes that the fax machine has beenI) andswitcthatedallON ( faxes stored in memory

 

been printed out.

1. Press the following buttons on the front panel.

Menu

7

Enter/ MonitorEnter/ Monitor

The front panel will read: “Cartridge Recovery In Progress”.

2.Once you hear or see a page start printing, open up the top cover (document feeder ass begin printing after about 30 seconds. You can see a page being printed by looking into

3.After the pen has moved to the center of the fax machine, and the beeping sound has disc over to the left side of the machine (viewed from the front).

4.You will see a piece of paper partially printed. Pull this paper until in sticks out about edge of the metal Paper Guide/Roller Assembly.

5.Turn off and unplug the fax machine. When you do this you will lose all deferred tra

6.With a moist Q-tip, wipe the ink that has accumulated on the metal Paper Guide/Roller Ass not to touch the ink with skin or clothing, since the ink will stain skin and clothing. U the Q-tip. Do not put water directly on the machine. Use as many moist Q-tips as are nece ink.

7.Using a dry Q-tip, remove any remaining moisture on the Paper Guide/ Roller Assembly.

8.Lower the top cover, plug in the fax machine, and turn it on. The fax machine will eject the output tray. Discard this piece of paper.

Paper Guide/Roller

Assembly

Figure 3￿19.￿ Cleaning￿ the￿ Paper￿ Guide/Roller￿ Assembly

3￿60 Operation and Usage

Page 132
Image 132
HP FAX-700 manual Paper Guide/Roller Assembly