![Assemble the Dispenser Assembly](/images/new-backgrounds/180260/18026089x1.webp)
4.Remove the dispensing lever clevis pin by pulling on the attached ring, and lift the dispensing lever from the assembly.
5.Grasp the bottom of the dispensing cylinder and the top of the dispensing piston, and pull the piston from the cylinder.
6.Wash the dispenser assembly parts in warm soapy water – do not use abrasive cleansers or scouring pads. Use the large end of the provided cleaning brush to clean the interior of the dispensing cylinder. Rinse the parts with clean water and let dry thoroughly. The dispenser assembly parts can also be washed in the top rack of a dishwasher.
Assemble the Dispenser Assembly
1.Apply a light coating of vegetable oil to the
Lubricate O-rings with Vegetable Oil
Continued…
CARE AND CLEANING
45