KitchenAid KPFD200 manual Cleaning The Frozen Dessert Maker, Cutout Slot, Correct Lever Position

Models: KPFD200

1 58
Download 58 pages 59.21 Kb
Page 46
Image 46
Cutout

CLEANING THE FROZEN DESSERT MAKER

2.Align the cutout in the piston with the slot on the dispensing cylinder, and insert the piston into the cylinder. Position the piston so that the cutout is directly beneath the center of the cylinder slot.

Cutout

Slot

3.Place the round end of the dispensing lever through the slot on the cylinder and into the piston cutout. The dispensing lever should be positioned so that it angles upwards, towards the ingredient funnel. Placing the dispensing lever upside-down will prevent the dispenser from opening fully.

Correct Lever Position

Incorrect Lever Position

4.Insert the clevis pin through the faceplate tabs and lever. The lever may have to be moved slightly so the pin can be aligned with the holes in the lever.

46

Page 46
Image 46
KitchenAid KPFD200 manual Cleaning The Frozen Dessert Maker, Cutout Slot, Correct Lever Position, Incorrect Lever Position