3.Remove the vent cap from the top of the frozen dessert maker. Wet the small end of the provided cleaning brush in soapy water and insert the brush into the freezing cylinder vent, then remove. Repeat several times.
Remove the Dispenser Assembly and Mixing Blade
1.Make certain the mixing blade and freezing system are turned off.
2.Remove the dispenser assembly by turning the dispenser assembly attachment knobs
4.Make certain the dispensing lever is in the closed (up) position, then pour a cup of clean rinse water into the freezing cylinder vent. Replace the vent cap.
5.Pour a quart of clean rinse water into the ingredient funnel, replace the lid, and turn on the mixing blade. Do not turn on the freezing system. After 30 seconds, dispense the water into a container and turn off the mixing blade. Repeat this step once more.
CARE AND CLEANING
3.Grasp the mixing blade and remove it from the freezing cylinder.
Continued…
43