HP FAX-700 guide

To reconfigure for quality, presolutions the buttons in the sequence shown.

→

3 →

7 →

Set

→

4 →

2 →

Set

→

Set

→

0 →

Stop

Substitute Memory Reception on the HP FAX-700 and FAX-750

The HP FAX-700 and FAX-750 have the ability to store an incoming document if a paper jam or an out condition occurs during the reception. An information code will appear in the fax machin condition requiring correction. Stored documents are automatically printed when the co ment is partially printed when the condition occurs, the remainder of the document will

If a power failure condition occurs, the fax machine will not be able to store the incomi When power is restored, a power failure report will automatically be printed. Notify the sen ment must be resent to you.

Setting number 10, Receive to Memory, is normally set to option 2 at the factory, and substit will automatically take place. However, if setting 10 has been set to option 1, Never, then it m Print on Error, for substitue memory reception to take place.

To use substitute memory reception mode if setting 10 has, pressb en theset buttonsoptionin1the sequenc shown.

		→

	Enter
→			→
→			→

			Enter
6	→				→		1		→

				Enter				Stop
		→
		→				→

0 →

Substitute Memory Reception on the HP FAX-900 and FAX-950

The HP FAX-900 and FAX-950 have the ability to store an incoming document if a paper jam or an out condition occurs during the reception. An information code will appear in the fax machin condition requiring correction. Stored documents are automatically printed when the co ment is partially printed when the condition occurs, the remainder of the document will

When fax parameter 22 is set to option 2 (valid), the substitute memory reception mode is enab (invalid), the mode is disabled.

To use substitute memory reception, press modethe buttons in the sequence shown.

→