HP manual HP FAX-700 and FAX-750 Service Parameters

Table 5-2. HP FAX-700 and FAX-750 Service Parameters (continued)

Service	Display		Parameter	Settings		Current	Standard
Parameter Indication			Description			Setting	Setting
Number
41	CED TO 300		This is the time interval01: 75 ms* 02: 1 s			1	1
	INTRVL		from the CED (called sta-
			tion identification) signal
			to the 300 bps signal
42	CSI TRANSMIT	Selects whether or not to		0:off / 1:on*		1	1
			transmit “Called Sub-
			scriber Identification”
			when called
43	TSI TRANSMIT	Selects whether or not to		0:off / 1:on*		1	1
			transmit a request for
			“Called Transmitting Sub-
			scriber Identification”
			when contacting another
			fax machine
44	CIG TRANSMIT	Selects whether or not to		0:off / 1:on*		1	1
			transmit a “Calling Sub-
			scriber Identification”
			when contacting another
			fax machine
45	CHAR ID		Selects whether or not to0:ff* / 1:on			0	0
	TRANSMIT		transmit a character ID
			when contacting another
			fax machine
46	ERROR		Selects the mode of error01:lines 02: ratio*			2	2
	DETECT		detection
47	LINE ERROR	Number of lines received		01:	128 lines*	1	1
			in error	02:	256 lines
				03:	512 lines
				04:	1024 lines
				05:	2148 lines
48	TOTAL ERROR	Percent of fax received in		01: 5%		3	3
			error	02: 10%
				03: 15%*
				04: 20%
49	RETURN		Selects between discon01:-		disconnect*	1	1
	RECEIVE		necting or continuing	02:	continue
			when the machine re-
			ceives an RTN signal
50	FALLBACK		If ON and received	0:off / 1:on*		1	1
	2400 BPS		image is degraded, re-
			send message at 2400
			BPS

5￿24 Problem Resolution