Function Parameters for the HP FAX-900 and FAX-950

Listing the Function Parameter Settings on the HP FAX-900 and FAX-950 (Test Mode 3)

Use the following procedure to print a list of the function parameter:) in f ontsettingsof the.Anfunctionasterisk parameter setting means that it has been changed from the factory default setting (U.S. s

Note Function parameters not set to the factory default setting may be a result parameters. Verify the user’s preference for these settings prior to resettin parameters.

Note

Function parameters 080 and 081 are tuned at the factory to optimize the unit’

 

operation. Therefore, these settings may differ from the standard function

 

resetting the fax machine to the shipment settings does not reset these tw

 

 

 

Menu

DEF

3

PRS

7

Start

Dial/Space

x 4

Stop

Tone

L

Test mode 3 prints a list of the function parameter settings. The printout is useful for review settings or producing a hard copy record of the settings. Use the following procedure (ve gram above) to print the function parameter settings:

1.With the fax machine in standby mode (message window showing date and time), press Me

2.With the message window showing SET MODE NO. =, press Dial/Space four times. The unit sounds beep for each key entry, but this is normal.

3.Press:.

4.With the message window showing SET MODE NO. =, press 3 to select test mode 3.

5.Press Start to print a listing of the function parameters.

6.Press Stop to return to the Standby mode.

Changing the Function Parameters on the HP FAX-900 and FAX-950 (Test Mode 1)

Menu

PRS

 

 

7

 

 

 

 

Start

Parameter Number

Dial/Space

x 4

Start

Tone

L 1

StartStop

Parameter

Value

To Repeat

Problem Resolution 5￿35

Page 210
Image 210
HP FAX-700 manual Function Parameters for the HP FAX-900 and FAX-950