To use telephone mode reception,lift the receiver when the handset or telephone that is connected rings. If you hear a “beep” in the receiver or the caller states that a fax is going to be sent t and hang up the receiver.

To configure for remote telephone mode, set faxreceptionparameter 47 to option 2 as follows:

Menu

7

7

Set

4

2

Set

Set

4

Stop

To use remote telephone mode, pickreceuptionhe receiver on the phone directly connected to the and press the * button on twicehe phtonesignal the fax machine. Hang up the telephone receiver.

Fax/Tel auto switch receptionis one of the attended modes of receiving, because it requires user i ceive a voice call. In this mode, your fax machine will automatically switch to fax or voi must pick up the receiver to monitor the voice communication.

Note

Due to telecommunications regulations, the Fax/Tel auto switch mode is no

 

Germany.

 

 

 

To configure for Fax/Tel auto switch mode, makerecsureptionthe Receive mode button is set to OFF (the l not lit) and you do not have any document in the automatic document feeder of your fax already set fax parameter 15 to option 2 (Fax/Tel), do so now. Press the buttons in the sequen

Menu

5

7

Set

4

2

Set

Set

1

Stop

To use Fax/Tel auto switch modeWhreception:a call comes in, your fax machine answers and if a fa received, your machine starts to automatically receive the fax. For a voice call, your fa signal through the speaker. To answer, lift the telephone receiver and press the Dial/Space before talking.

Note

You can set the length of time that the fax machine “beeps” for you to pick u

 

changing fax parameter 18. Factory setting is 20 seconds. If you do not answer

 

time specified, the fax machine will return a fax tone to the calling machin

 

communicate with a “silent” fax machine. You can also set the “beep” volume

 

parameter 10. Fax parameters are presented in chapter 4.

 

 

 

Operation and Usage 3￿37

Page 109
Image 109
HP FAX-700 manual Operation and Usage