U65C`tfuvq/cbdlvq/gnQbhf6Xfeoftebz-Kvmz23-31115;1:QN
Connecting your Monitor
ENGLISH
Be sure to read the ‘Safety Information’ at the front of this User Guide before carrying out this procedure.
Analog cable:
1.Turn off your PC and all attached devices.
2.Connect the signal cable to the video port on the back of your computer. This port might be directly attached to your computer (figure A), or it might be part of a video adapter card (figure B). The video port on your computer or video adapter card may be colored blue to match the blue connector on your monitor’s video cable.
ESPAÑOL DEUTSCH FRANÇAIS
The AC adapter and signal cable are connected to
your monitor. If you wish to change these or to fit a different stand, see Further Help on page 25.
Be sure to read the ‘Safety Information’ at the front of this User Guide before carrying out this procedure.
3.Connect the power cord to the power adapter first, then insert the plug into a properly grounded electrical outlet.
Digital cable:
1.Turn off your PC and all attached devices.
2.Connect the signal cable to the video port on the back of your computer. This port might be directly attached to your computer (figure A), or it might be part of a video adapter card (figure B). The video port on your computer or video adapter card may be colored white to match the white connector on your monitor’s video cable.
COMPL & WARR JAPANESE ITALIANO
5
