TROUBLESHOOTING

Performance problems often can be corrected by the user. Please read through this chart for a possible solutions to common problems.

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

The battery is connected

The SpeedCharge is in

Press the CHARGE RATE

and the charger is on,

tester mode, not charger

button to activate charging

but it isn’t charging.

mode.

and select a charge rate.

 

 

 

Indicator lights are lit in an

The charger may be

Return to place of pur-

erratic manner not

defective.

chase for replacement.

explained in the “Using

 

 

Your Battery Charger”

 

 

section.

You might have

Make sure nothing is

 

accidentally activated a

touching the control panel,

 

special diagnostic mode.

then unplug the unit and

 

 

plug it in again.

 

 

 

The CHECK (red) light

This will happen if the

Reset the charger by un-

always flashes before the

battery did not reach full

plugging it or briefly

battery is completely

charge within 24 hours.

disconnecting it or briefly

charged.

May be due to a very

disconnecting the negative

 

large battery or a bank of

battery clip. Select the

 

batteries requiring more

desired charge rate and

 

power than a 30/10 Amp

battery type again, if

 

charger can deliver within

necessary.

 

24 hours. The battery

 

 

may also be faulty.

 

 

 

 

Engine crank time is less

Starter motor may be

Charge the battery at the

than specified.

drawing more than 60

30A￿￿10A rate for 10 to

 

Amps.

15 minutes then crank the

 

 

engine.

 

 

 

The green CHARGED

The battery may be fully

If the battery is in a vehicle,

light turns on a few

charged or recently

turn the headlights on for a

minutes after connecting

charged, leaving the

few minutes to reduce the

to the battery.

battery voltage high

battery voltage and try

 

enough to appear to be

charging again.

 

fully charged.

 

 

 

 

MAINTENANCE AND CARE

A minimal amount of care can keep your battery charger working properly for years.

1.Clean the clamps each time you are finished charging. Wipe off any battery fluid that may have come in contact with the clamps to prevent corrosion.

2.Coil the input and output cords neatly when storing the charger. This will help prevent accidental damage to the cords and charger.

3.Occasional cleaning of the case of the charger with a soft cloth will keep the finish shiny and help prevent corrosion.

15

Page 14 Page 16
Page 15
Image 15
Schumacher 6000A owner manual Troubleshooting, Maintenance and Care, Problem Possible Cause Solution
Page 14 Page 16

6000A specifications

The Schumacher 6000A is a powerful and versatile battery charger designed for automotive enthusiasts and professionals alike. This unit offers a perfect blend of advanced technology and user-friendly design, making it a staple for maintaining and reviving 12-volt batteries.

One of the standout features of the Schumacher 6000A is its high output of 6000 amps, allowing it to quickly charge even the most depleted batteries. This unit is particularly beneficial for those who often work with larger vehicles, including trucks and SUVs, where traditional chargers may fall short. The robust construction ensures durability, essential for both home garages and professional workshops.

The Schumacher 6000A also incorporates smart charging technology. This includes an automatic shut-off feature that prevents overcharging, safeguarding your battery and extending its lifespan. Furthermore, it uses an intelligent microprocessor that adjusts the charging process based on the battery’s condition, optimizing power delivery for both standard and AGM batteries. This adaptability not only enhances performance but also ensures that various battery types are sufficiently catered to.

Another key characteristic of the Schumacher 6000A is its user-friendly interface. Equipped with an intuitive LED display, users can easily monitor the charging status and battery condition at a glance. The clear visual indicators provide real-time updates, allowing users to stay informed about the process without requiring technical expertise.

Safety is another critical aspect of the Schumacher 6000A. The charger features reverse polarity protection, preventing accidental damage caused by incorrectly connecting the clamps. Additionally, it comes with built-in short-circuit protection, ensuring that users can operate the unit with peace of mind.

Portability is also factored into the design. The charger is compact and lightweight, making it easy to transport and store. With its ergonomic handle, users can easily maneuver the unit when needed.

In summary, the Schumacher 6000A battery charger stands out for its impressive charging capabilities, advanced smart technology, user-friendly features, and robust safety mechanisms. Whether for personal use or professional applications, it is an ideal choice for anyone looking to keep their batteries in top-notch condition. This charger not only meets the demands of modern automotive technology but also ensures reliability and ease of use.
Top Page Image Contents