Schumacher 6000A CONTROL PANEL GUIDE

9
CONTROL PANEL GUIDE
6000A CONTROL PANEL GUIDE
MODE OF OPERATION
Charged
Charging
Check
Battery %
Voltage
Alternator %
2A
30A10A
60A Start
Regular
Deep-Cycle
AGM,
Gel Cell
Digital
Display
Initial power-up, battery not detected O O O 0.0 No battery or reversed battery detected O 0% or 0.0V Battery tester activated O 0~100%
Battery tester with charged battery O O 100% Battery tester with no battery O O 0%
Voltage meter activated O 0.0~17.0V Alternator tester activated O 0~199%
Alternator tester on good alternator O O 0~199% Alternator tester on bad alternator O O 0~199%
2 Amp charge with battery detected O O xx% or xx.xV 10 Amp charge with battery detected O YEL xx% or xx.xV 30 Amp charge activated O ORG xx% or xx.xV Charge complete - Maintain Mode started O 100% or xx.xV 60A Engine Start
Waiting for engine crank O O O 1.0~16.0V Cranking engine O O 8 0 Cool down after cranking O B 120 0
Desulfation mode activated B 15% or 16V Charge aborted B 18.8 (B)
B indicates an LED that blinks on and off. ORG indicates an LED that is on and orange. O indicates an LED that is on continuously. YEL indicates an LED that is on and yellow.
User sel. User sel.
User selected User selected User selected User selected User selectedUser selectedUser selected
User selected User selected User selected User selected User selected
User sel.
User selected User selected
User sel. User sel. User sel.