CHARGING BATTERY REMOVED FROM THE VEHICLE:

POSITIVENEGATIVE

BATTERY CHARGER

BATTERY

POWER

CORD

24", 6 GAUGE CABLE

TO

GROUNDED

POWER

OUTLET

1.Note the polarity of the battery posts by checking the identification marks on the battery: POSITIVE (POS, P or +) and NEGATIVE (NEG, N or -). The positive post is usually larger than the negative post.

2.Attach at least a 24-inch-long, 6- gauge (AWG), insulated battery cable to NEGATIVE (NEG, N or -) battery post. Rock and twist the clamp back and forth to be sure a solid electrical connection is made.

3.Connect the red (POSITIVE) output clamp to the POSITIVE battery post. Rock and twist the clamp back and forth to be sure a solid electrical connection is made.

4.Position yourself as far away from the battery as possible, and then connect the black (NEGATIVE) output clamp to the free end of the cable.

5.Plug the power cord into an AC outlet. The charger will be set to the default state of 2A charge rate and REGULAR battery type (tester).

6.Press the appropriate control buttons to select the desired charge rate and battery type. Within a few seconds, the CHARGING (yellow) LED should light and the charging process should start. If the CHECK (red) LED is on, check for correct cable connections.

7.To disconnect the Charger, unplug its power cord before attempting to disconnect the charger clamps. Then, standing away from the battery, remove the output clamp from the NEGATIVE battery post. Finally, remove the output clamp from the POSITIVE battery post.

8.Clean and store the charger in a dry location.

USING ENGINE START

Your battery charger can be used to jump start your car if the battery is low. Follow these instructions on how to use the ENGINE START feature.

IMPORTANT: Follow all safety instruc- tions and precautions when charging your battery. Wear complete eye protection and clothing protection. Charge your battery in a well-ventilated area.

IMPORTANT: Using the ENGINE START feature WITHOUT a battery installed in the vehicle could cause damage to the vehicle’s electrical system.

1.With the charger plugged in and connected to the battery of the vehicle, set the CHARGE RATE to 60A START. Only the 60A START and CHARGING LEDs (both yellow) should be lit.

2.Crank the engine for no more than 8 seconds. If engine does not start, wait 2 minutes before cranking again.

3.After the engine starts, unplug the power cord before disconnecting the output clamps from the battery.

4.Clean and store the charger in a dry location.

7

Page 6 Page 8
Page 7
Image 7
Schumacher 6000A owner manual Charging Battery Removed from the Vehicle, Using Engine Start
Page 6 Page 8

6000A specifications

The Schumacher 6000A is a powerful and versatile battery charger designed for automotive enthusiasts and professionals alike. This unit offers a perfect blend of advanced technology and user-friendly design, making it a staple for maintaining and reviving 12-volt batteries.

One of the standout features of the Schumacher 6000A is its high output of 6000 amps, allowing it to quickly charge even the most depleted batteries. This unit is particularly beneficial for those who often work with larger vehicles, including trucks and SUVs, where traditional chargers may fall short. The robust construction ensures durability, essential for both home garages and professional workshops.

The Schumacher 6000A also incorporates smart charging technology. This includes an automatic shut-off feature that prevents overcharging, safeguarding your battery and extending its lifespan. Furthermore, it uses an intelligent microprocessor that adjusts the charging process based on the battery’s condition, optimizing power delivery for both standard and AGM batteries. This adaptability not only enhances performance but also ensures that various battery types are sufficiently catered to.

Another key characteristic of the Schumacher 6000A is its user-friendly interface. Equipped with an intuitive LED display, users can easily monitor the charging status and battery condition at a glance. The clear visual indicators provide real-time updates, allowing users to stay informed about the process without requiring technical expertise.

Safety is another critical aspect of the Schumacher 6000A. The charger features reverse polarity protection, preventing accidental damage caused by incorrectly connecting the clamps. Additionally, it comes with built-in short-circuit protection, ensuring that users can operate the unit with peace of mind.

Portability is also factored into the design. The charger is compact and lightweight, making it easy to transport and store. With its ergonomic handle, users can easily maneuver the unit when needed.

In summary, the Schumacher 6000A battery charger stands out for its impressive charging capabilities, advanced smart technology, user-friendly features, and robust safety mechanisms. Whether for personal use or professional applications, it is an ideal choice for anyone looking to keep their batteries in top-notch condition. This charger not only meets the demands of modern automotive technology but also ensures reliability and ease of use.
Top Page Image Contents