ProForm PFEL04900 manual Maintenance and TROUBLE-SHOOTING, Pulse Sensor TROUBLE-SHOOTING

MAINTENANCE AND TROUBLE-SHOOTING

Inspect and tighten all parts of the elliptical crosstrainer regularly. Replace any worn parts immediately.

For smooth
operation of	Incline
the elliptical	Frame
crosstrainer,
the incline
frame should
be kept clean.
Using a soft
cloth and mild
detergent,		Wheel
clean dust and
other residue
from the incline

frame where the wheels make contact with it. Other parts of the elliptical crosstrainer can also be cleaned in this manner. Never use abrasives or solvents.

LUBRICATING THE INCLINE BRACKET

HOW TO LEVEL THE ELLIPTICAL CROSS- TRAINER

If the elliptical
crosstrainer
does not sit
flat on the
floor, one or		Jam
both of the
	Pad		Nut
leveling pads
should be
adjusted.
First, loosen
the jam nut on
each leveling
pad. Next,
turn the leveling pads as needed until the elliptical

crosstrainer is level. When the leveling pads are prop- erly adjusted, firmly retighten the jam nuts.

PULSE SENSOR TROUBLE-SHOOTING

The incline bracket and the bolt on which it pivots should be regularly lubricat- ed. Apply a small amount of the included lubricant to the bolt and between the bracket and the upright.

	Upright
Bolt	Incline
	Bracket

¥	Avoid moving your hands while using the pulse sen-
	sor. Excessive movement may interfere with heart
	rate readings.
¥	Do not hold the metal contacts too tightly; doing so
	may interfere with heart rate readings.
¥	For the most accurate heart rate reading, hold the
	metal contacts for about 15 seconds.
¥	For optimal performance of the pulse sensor, keep
	the metal contacts clean. The contacts can be
	cleaned with a soft clothÑnever use alcohol,

CONSOLE TROUBLE-SHOOTING

If the console does not function properly, the batteries should be replaced. To replace the batteries, refer to assembly step 7 on page 7.

abrasives, or chemicals.

14