Special features of your oven control.

ge.com

Your new press pad control has additional features that you may choose to use. The following are the features and how you may activate them.

The special feature modes can only be activated while the display is showing the time of day. They remain in the control’s memory until the steps are repeated.

When the display shows your choice, press the Start pad. The special features will remain in memory after a power failure, except for the Sabbath feature, which will have to be reset.

Safety Instructions

 

12-Hour Shut-Off

+

With this feature, should you forget and leave the

 

oven on, the control will automatically turn off the

 

oven after 12 hours during baking functions or

 

after 3 hours during a broil function.

If you wish to turn OFF this feature, follow the steps below.

Press the Bake and Broil Hi/Lo pads (on double oven models, use the upper oven controls) at the same time for

3 seconds until the display shows SF.

Press the Delay Start pad until

no shdn (no shut-off) appears in the display.

Press the Start pad to lock in the no shdn (no shut-off) feature and leave the control set in this special features mode.

NOTE:

On models with press pad controls for both ovens, this activates this special feature for both ovens.

On models with oven knob(s), this feature is not available for the lower oven.

Operating Instructions Care

Fahrenheit or Celsius Temperature Selection

and

+

Your oven control is set to use the Fahrenheit

 

 

temperature selections but you may change this

 

 

to use the Celsius selections.

 

 

 

 

 

+

 

 

Press the Bake and Broil Hi/Lo pads

 

 

 

 

 

 

 

 

 

 

(on double oven models, use the upper

 

 

 

 

 

 

 

 

oven controls) at the same time for

 

 

 

 

3 seconds until the display shows SF.

 

 

 

 

Press the Broil Hi/Lo and Cooking

 

 

 

 

 

 

 

 

Time pads at the same time. The

 

 

 

 

 

 

 

 

display will show F (Fahrenheit).

Press the Broil Hi/Lo and Cooking Time pads again at the same time. The display will show C (Celsius).

Press the Start pad.

NOTE:

On models with press pad controls for both ovens, the new setting will be displayed for both ovens.

On models with oven knob(s), this feature is not available for the lower oven.

Cleaning Troubleshooting

 

Tones at the End of a Timed Cycle

 

At the end of a timed cycle, 3 short beeps will

+

 

sound followed by one beep every 6 seconds until

 

the Clear/Off pad is pressed. This continuous

 

6-second beep may be canceled.

To cancel the 6-second beep:

Press the Bake and Broil Hi/Lo pads (on double oven models, use the upper oven controls) at the same time for

3 seconds until the display shows SF.

Press the Kitchen Timer On/Off pad. The display shows CON BEEP (continuous beep). Press the Kitchen Timer On/Off pad again. The display shows BEEP. (This cancels the one beep every 6 seconds.)

Press the Start pad.

NOTE:

On models with press pad controls for both ovens, this cancels the end of cycle tone for both ovens.

On models with oven knob(s), this feature is not available for the lower oven.

17

Tips Consumer Support

Page 17
Image 17
GE JTP3530 Special features of your oven control, Tips Consumer Support, Safety Instructions, Cleaning Troubleshooting