9. Identify the Left Pedal Arm (3), which has an ÒLÓ sticker |
on it. Be careful not to confuse the Left Pedal Arm |
with the Right Pedal Arm (not shown); look at the |
position of the round tube in the inset drawing to |
identify the Left Pedal Arm. Next, identify the Left |
Pedal (41), which has the letter ÒLÓ molded onto the |
bottom. |
Turn over the Left Pedal Arm (3) as shown. Insert the |
three plastic posts on the Left Pedal (41) into the three |
indicated holes in the Left Pedal Arm. Make sure that |
the Left Pedal is turned as shown. Attach the Left |
Pedal with three M4 x 16mm Flange Screws (43). |
Attach the Right Pedal (not shown) to the Right Pedal |
Arm (not shown) in the same way. |
10. Apply grease to an M8 x 108mm Bolt (79). Slide an M8 |
9
43
3 |
Open Side
|
|
|
|
|
|
|
|
|
|
|
|
|
|
41 |
|
|
|
|
| Plastic Posts |
|
|
|
|
|
|
|
Round
3 Tube
Open Side
Washer (81) onto the Bolt and insert the Bolt into the |
indicated side of the Left Pedal Arm (3). Be careful not |
to confuse the Left Pedal Arm with the Right Pedal |
Arm (not shown); look at the position of the round |
tube to identify the Left Pedal Arm. Next, slide a |
Spacer (44), a Pedal Wheel (77), and another Spacer |
(44) onto the Bolt and push the Bolt through the other |
side of the Left Pedal Arm. |
Next, slide a Tube Spacer (82), a Chrome Tube (21), and an M8 Washer (81) onto the M8 x 108mm Bolt (79). Tighten an M8 Nylon Locknut (80) onto the Bolt.
10
Grease
81
82
21
80
81
Round
Tube
Attach the other Chrome Tube (not shown) to the Right Pedal Arm (not shown) in the same way.
79 
44
77 | 3 |
44 |
|
10a
82
3 Front
80
81 21
81
View
79
44
44
77
8
