Sharp PGLX3000, PG-LX3500, PGLX3500, PG-LX3000, PG-LW3500 Connecting Pin Assignments, HDMI Terminal

Connecting Pin Assignments

COMPUTER/COMPONENT 1, 2 input and COMPUTER/COMPONENT output Terminals:

mini D-sub 15 pin female connector

11		15	COMPUTER Input/Output		COMPONENT Input/Output
			Pin No.	Signal	Pin No.	Signal
			1.	Video input (red)	1.	PR (CR)
			2.	Video input (green/sync on green)	2.	Y
			3.	Video input (blue)	3.	PB (CB)
			4.	Not connected	4.	Not connected
			5.	Not connected	5.	Not connected
			6.	Earth (red)	6.	Earth (PR)
	1	5
			7.	Earth (green/sync on green)	7.	Earth (Y)
6		10	8.	Earth (blue)	8.	Earth (PB)
			9.	Not connected	9.	Not connected
			10.	GND	10.	Not connected
			11.	Not connected	11.	Not connected
			12.	Bi-directional data	12.	Not connected
			13.	Horizontal sync signal: TTL level	13.	Not connected
			14.	Vertical sync signal: TTL level	14.	Not connected
			15.	Data clock	15.	Not connected

HDMI Terminal

18	2	Pin No.	Name	Pin No.	Name
		1.	T.M.D.S. Data 2+	11.	T.M.D.S. Clock Shield
		2.	T.M.D.S. Data 2 Shield	12.	T.M.D.S. Clock–
		3.	T.M.D.S. Data 2–	13.	CEC
		4.	T.M.D.S. Data 1+	14.	Utility
		5.	T.M.D.S. Data 1 Shield	15.	SCL
		6.	T.M.D.S. Data 1–	16.	SDA
		7.	T.M.D.S. Data 0+	17.	DDC/CEC ground
19	1
		8.	T.M.D.S. Data 0 Shield	18.	+5V power
		9.	T.M.D.S. Data 0–	19.	Hot plug detection
		10.	T.M.D.S. Clock+

RS-232C Terminal: D-sub 9 pin male connector of the DIN-D-sub RS-232C adaptor

1	5	Pin No.	Signal	Name	I/O	Reference
		1.				Not connected
		2.	RD	Receive Data	Input	Connected to internal circuit
		3.	SD	Send Data	Output	Connected to internal circuit
		4.				Not connected
		5.	SG	Signal Ground		Connected to internal circuit
		6.				Not connected
		7.	RS	Request to Send		Connected to CS in internal circuit
6	9
		8.	CS	Clear to Send		Connected to RS in internal circuit
		9.				Not connected

-2