Resetting the Lamp Timer of the Projector via LAN
When the projector is connected to a network, you can use the communications program to send a command to reset the lamp timer. The example below uses Windows® XP as the operating system. When you use Windows Vista®, use other communications program referring to the following steps, because Windows Vista® does not come with HyperTerminal.
1 Click “Start” – “All Programs” – “Accessories” – “Communica- tions” – “HyperTerminal”.
•If you do not have HyperTerminal installed, see the operation manual of your computer.
•Depending on the settings of your computer, you may be required to enter your area code and other details. Enter the information as required.
2 Enter a name in the “Name” field, and click “OK”.
3 If you are required to enter the area code, enter it in the “Area code” field. From the “Connect using”
Select
“TCP/IP (Winsock)”
4
Enter the IP address of the projector in the “Host address” field (see “TCP/IP” on the “Network” menu of the projector), and enter the data port of the projector in the “Port number” field (“10002” is the factory default setting), and click “OK”.
-22
