Sharp PGLW3000, PG-LX3500, PGLX3500, PGLX3000 Setting up a Network Con- nection for the Projector

Models: PGLW3000 PGLW3500 PG-LW3000 PG-LW3500 PG-LX3000 PGLX3000 PGLX3500 PG-LX3500

1 26
Download 26 pages 9.73 Kb
Page 15
Image 15
3.Setting up a Network Con- nection for the Projector

Setting up the Projector Network Environment

3.Setting up a Network Con- nection for the Projector

Settings for such items as the projector's IP address and subnet mask are compatible with the existing network. Set each item on the projector as follows. (See page 62 of the projector's operation manual for setting.)

DHCP Client: Off

IP Address: 192.168.150.002

Subnet Mask: 255.255.255.000

1

2

Start Internet Explorer (version 6.0 or later) on the computer, and enter “http://192.168.150.2/” in “Address”, and then press the Manual background “Enter” key.

If a user name and a password have not yet been set, just click the “OK” button.

If a user name and a password have been set, input the user name and the password, and click the “OK” button.

If the user name or password is entered incorrectly three times, an error message will be displayed.

When you are using Internet Explorer 7 or later, other setup screen may be displayed. In

this case, make the proper adjustments for the setup screen.

3 When the screen as shown on the right appears, click “TCP/IP”.

Manual background-15

Page 15
Image 15
Sharp PGLW3000, PGLX3500 Setting up a Network Con- nection for the Projector, Setting up the Projector Network Environment