Muratec MFX-1300/1700 Transport mode is not turned off, Your machine, then retry again, No Report

What you see on the LCD Macro In Use

Memory Overflow Start Or Cancel

Mirror Carriage Error

Mirror Locked

No Command

No Department Code

No Document Stored

No Drum

No Number Stored

What it means/What to do

You tried to change the function for a Soft key,but that Soft key has been programmed in a Macro key. You cannot change the Soft key function until erase the Macro key that contains the Soft key you want to change. Erase the Macro key,thentry again.

During transmission (or copying), you tried to enter more pages into memory than your fax could store. Press STA RT to tell your fax to keep as many pages in memory as possible, or press CANCEL to delete from memory all pages stored during this operation (but not previous operations).

The mirror carriage of your machine has become inoperable. Call your authorized Muratec dealer or Muratec Customer Support.

The transport mode is not turned off.

Turn off the transport mode (see page 1.8).

You pressed REVIEW C O M M A N D S to review upcoming commands, but your fax machine had none stored.

You tried to turn on the department code setting but there are no department codes stored in your fax machine. Store at least one department code, then try again.

...or...

You entered incorrect department code at fax sending while the department feature is on. Enter correct department code.

You tried to print a document from memory,but your fax machine had none stored.

The drum cartridge is missing or has not been properly installed in your fax machine.

Please properly install the drum cartridge.

You selected an autodialer, batch box or F-Code box number for which there is no fax (or phone) number programmed. Either choose another num- ber or dial a phone number directly from the numeric keypad.

		Just in case
What you see on the LCD	What it means/What to do
No Passcode	You tried to program a security feature (see page
	3.49), but there s no protection passcode stored in
	your fax machine. Store a protection passcode in
	your machine, then retry again.
No PIN Number	You selected Mode1 in the PIN mask feature and
	tried to call an autodialer number in which no PIN
	has been entered, or to call using numeric keypad
	without PIN.Enter a PIN, then try again.
No Report	You requested an activity journal or confirmation
	report, but your fax machine has no record of any
	fax jobs having occurred.
No Toner Cartridge	The toner cartridge is missing or has not been
	properly installed in your fax machine. Please
	properly install the toner cartridge.
Not Allowed in Macro	During macro registration, you pressed the key
	which cannot be registered in Macro, such as
	Monitor/Call key or Security Reception key.
Other Key Setting	You tried to enter the same function which is
	already stored in other Soft key.
	Store the different function.
Open Top Cover	The paper is jammed in your fax machine.
Please Remove Paper	Open the cover indicated on the LCD, and
Open 1st Side Cover	remove the jammed paper carefully.
Please Remove Paper
Open 2nd Side Cover
Please Remove Paper
Open Top/2-Bin Cover
Please Remove Paper
Remove Bypass Paper
Open&Close Top Cover
Open&Close ScanCover	Either your document wasn t inserted correctly,
Reset Document	or the fax to which you re sending can t handle the
	document s page length.Reset the page and try
	again.
Please Call Service	The printer unit of your fax machine has become
	inoperable. Call your authorized Muratec dealer or
	Muratec Customer Support.

5.7