Muratec MFX-1300/1700 manual Setting Sleep mode Energy saving mode, Primary mode

Changing the default settings

Setting Sleep mode (Energy saving mode)

Default setting: On

Your machine is initially set to be in the Sleep mode automatically when 5 minutes has passed after you pressed any key last.

If you want to set the Sleep mode to Off, you can set it here.

Note: If you want to change the time, see page 1.19.

1 Press Program key,B,1,0,5, ENTER.

Sleep Mode	:On
/	/Enter

2 Press or until the mode you want appears.

3 Press ENTER to save the setting.

Helpful Tip: Pressing ENERGY S AVING, you can make the machine to be in the Sleep mode immediately regardless of this on/off setting and the time setting on page 1.19.

Note: All LED lamps on the control panel will not be off, even when the machine is in the sleep mode.

Primary mode

Default setting: None

You can set the primary standby mode in this operation. After finishing any jobs, your machine will return to the mode you set here immediately.

1 Press Program key,B,1,0,7, ENTER.

Primary Mode	:None
/	/Enter

2 Press or until the mode you want appears.

3 Press ENTER to save the setting.

Setting the paper source

Default setting: 1st cassette: Fax/Copy, Bypass Tray: Fax/Copy

You can choose one of following for each paper source:

Fax : Select this if you want to use the paper source you selected for faxing and list (or report) printing.

Copy : Select this if you want to use the paper source you selected for copying only.

Fax/Copy : Select this if you want to use the paper source you selected for faxing, list (or report) printing and copying.

Not Used : Select this if you want to use the paper source you selected for PC printing.

Note: PC printing is available only when your machine has the optional printer controller kit.

1 Press Program key,B,1,0,9, ENTER.The LCD shows:

Cassette1 :Fax/Copy / /Enter

2 Press or until the mode you want appears.

3 Press ENTER to save the setting. The LCD shows:

Bypass Tray:Fax/Copy / /Enter

4 Press or until the mode you want appears.

5 Press ENTER to save the setting.

Setting 2-bin tray (Option)

Default setting: Copy exit: Lower tray, Fax exit: Upper tray, List exit: Upper tray, PC- Fax exit: Upper tray

You will set where to exit the printed paper in this operation.

Note: This operation will appear only when your machine has the optional 2-bin tray unit.

1 Press Program key,B,1,1,0, ENTER.

2-Bin Tray	:Off
/	/Enter

4.10