Muratec MFX-1300/1700 manual Enter,Enter

A D VA N C E D FUNCTIONS,ENTER.

Note: If changing a previously stored command, skip to step 7.

5 Press until Communication appears.

Type :Communication / /Enter

6 Press ENTER.The LCD now shows either:

P2:Fax#/Advan.Func.	or	P2:Fax#/Advan.Func.
_		9-5558743_

7 Use the numeric keypad to enter the number exactly as your machine should dial it, including whatever codes your phone system requires. The number can be up to 40 characters in length:

P2:Fax#/Advan.Func. 9-5550629_

Your display can show only 20 characters at a time. To view characters beyond those 20, press to scroll to the leftor to scroll to the right.

Important: Do not press ENTER.

8 Now,while you still can see the fax number on the LCD,press A D VA N C E D FUNCTIONS four times and then press ENTER.The LCD shows:

Enter Sub-Address

_

9 Use the numeric keypad to enter the ITU-Tsub-address for the box to which you want to send the document. Here, we ve entered 123456:

Enter Sub-Address 123456_

10 Press ENTER.The LCD shows:

Enter Password

_

Note: Ifthereisntapassword for this box, press ENTER,then skip to step 14.

11 Use the numeric keypad to enter the appropriate ITU-Tpassword for the box. Here, we ve entered 654321:

Enter Password 654321_

When finished, press ENTER.

Advanced features

12 If you want the transmission to begin immediately every time you press the key, press ENTER and skip to step15.

If you want to delay the transmission, press

13 Next, tell your fax to carry out this delayed command one of these ways:

Option 1: Perform the command once at a certain time on a certain day of the month. (For example, Do this at 5:05 P M on the 30th. )

To select this option, use the numeric keypad to enter the date and time when the fax should perform the command:

Delayed

Enter Time: 30/17:05

Option 2: Perform the command at a certain time each day you press the key.(For example, Do this at 5:05 P M today.)

To select this option, use the numeric keypad to enter 0,0 and then the time when the fax should perform the command:

Delayed

Enter Time: 00/17:05

14	Press	ENTER,ENTER.
15	Press	STO P to return your machine to standby mode.

3.43