Muratec MFX-1300/1700 Daylight Saving On Enter, Your Fax Number 9725555525, Your Name Upper

7 The LCD now asks if you want to set the calendar/clock to automatically recognize daylight saving time (DST).

Daylight Saving :Off / /Enter

When the setting is On, your machine automatically recognizes DST at2 appropriate switchover Sundays each year.

When the setting is Off, no automatic change will occur.

A M on the

8	Press			or	until the mode you want appears.
	Here, we ve changed the setting to On:
			Daylight Saving :On
					/ /Enter
9
	Press ENTER to save the setting and continue.
10	The LCD now asks you to enter your fax number as you want it to appear on other
	fax machines				displays or printouts. The fax industry term for this
	number is Subscriber ID.
			Your Fax Number
11
	Use the numeric keypad to enter the fax number.The number may contain up to
	20 characters.
			Your Fax Number
		9725555525_
	Note:			If you make a mistake, press CANCEL to erase to the left.
				To change just one number, press to move left,or to move right.
				Press CANCEL to erase the number.Then re-enter the fax number cor-
				rectly.
12	Press ENTER to save the number.
13	The LCD now asks you to enter the name you want to appear at the top of faxes
	you send. The name may be up to 22 characters in length.
	Use the one-touch keys to enter letters and other non-numeric characters.
	(Refer to Entering characters on page 1.12.)
			Your Name ;Upper
		_
14
	Press ENTER to save the setting and continue.

					Getting started
15	The LCD now asks you to enter the type of dialing needed for the fax machine,
	either tone or pulse:
		Phone Type		:Tone
			/	/Enter
16
	Press or until the mode you want appears.
	Here, we ve changed the setting to Pulse mode:
		Phone Type		:Pulse
			/	/Enter
17
	Press ENTER to save the setting and continue.
18	The LCD now shows the machine s current reception mode.
		Fax Ready	/	/Enter
19
	For now, press		or	until the setting Fax Ready appears. (This setting can
	always be changed. We ll discuss reception modes further on pages 2.10 2.11.)
20	Press ENTER to save the setting and continue.
21	The LCD now asks you to enter the time for the sleep mode. Your machine will
	automatically enter sleep mode after your selected idle time has elapsed.
		Sleep Mode Timing
		(001-240)	005 min.
22
	Enter the time (in minutes) using the numeric keypad.
23	Press ENTER to save the setting. Your machine will return to standby mode.

1.19