Muratec MFX-1300/1700 manual Limiting polling access to your fax machine, Passcode

Advanced features

Limiting polling access to your fax machine

When you set the passcode, a calling fax which doesn t present the proper passcode cannot poll from your fax.

Important: The passcode you use for polling operation is not the same as the protec- tion passcode (see page 3.49).

Note: If you re using the Block Junk Fax feature (see pages 3.53 3.54), even incom- ing calls which meet the passcode test must come from phone numbers you ve approved.

To set your fax machine s passcode:

1

2

Decide on the four-digit passcode (0001 9999) you want to use. W rite it down, and put it in a safe place.

Press Program key,B,2,1,3, ENTER.The LCD shows the current code:

Passcode

Passcode :0000

3 Use the numeric keypad to enter the desired four-digit passcode.

Passcode

Passcode :5627

4 Press ENTER to save the setting.

Note: To turn off the limiting polling, change the passcode to 0000 by repeating steps 1 4 and entering 0000 in step 3.

3.15