Muratec MFX-1300/1700 manual Bypass Tray Ltr Enter, Loading paper in bypass tray

Getting started

6	Press or until the recording paper size for the bypass tray you want
	appears. In this example, we ve chosen Ltr.
		Bypass Tray	:Ltr
		/	/Enter
7
	Press ENTER.
	Press STO P to return the machine to standby mode.

Loading paper in bypass tray

When you need to use a size of paper not currently loaded in your machine s paper cas- sette(s), or when you want to use a special type of paper (such as transparency film), use the bypass tray.

1 Open the bypass tray on the right side of your machine.

2 Pull out the hopper of the bypass tray and pull the flapper release lever.

3 Place the paper on the bypass tray. Adjust the paper guide to fit the paper and insert the paperuntilit comes to a stop.

Then push back the flapper release lever.

Note: In Fax mode, if you have set the Letter, Legal or Half-letter sized paper in the bypass tray, the machine will use this paper when it runs out of the paper in the paper cassette during the fax reception.

1.10