Muratec MFX-1300/1700 manual 03Erase F-Code Box Check Enter/Cancel, Erase F-Code Box ** Complete

START.

To have it begin now, skip to step 13. To delay it, go on to step 11.

What you do now depends on when you want the transmission to begin.

entering a speed-dial

STA R T.

9 Enter the fax number either by pressing a one-touch key, number or dialing from the numeric keypad. Do not press

10

7 Use the numeric keypad to enter the password. In this example, we ve entered 654321.

Enter Password 654321_

8 Press ENTER.The LCD shows:

Enter Fax Number

_

6 Press ENTER.

If you ve entered an incorrect I.D.code, your fax machine rejects the attempt and returns to standby mode.

If you ve entered the correct I.D.code, the display shows:

03:Erase F-Code Box Check Enter/Cancel

Note: If you want to quit without erasing the F-Code box you ve selected, press CANCEL.The fax will return to step 2.

Note: If you want to quit without erasing any F-Code box, press STO P. The machine returns to standby mode.

7 Press ENTER to erase the F-Code box.

Erase F-Code Box ** Complete **

To erase another F-Code box, repeat steps 2-7.

To finish, press STO P.

F-Code transmission and polling

W ith F-Code, your machine can send secure transmissions, perform relay broadcast ini- tiations and even poll from other ITU-T-equipped machines, regardless of manufacturer. You can do this two ways:

Using the programmable one-touch key (see pages 3.40 3.43)

Entering the ITU-Tsub-address and password directly, which is what we ll describe here.

Note: For F-Code communication to work, three things must be true:

The remote fax machine must support ITU-Tsub-addressing

The remote fax must have a mailbox with an ITU-Tsub-address created on it

You must know the ITU-Tsub-address and password (if any) for the remote machine s mailbox

F-Code transmission

1 Insert the document.

2 Adjust the resolution and contrast if necessary.

3 If you want to toggle between real time transmission and memory transmission,

press M E M O RY TRANSMIT.

Advanced features

4 Press A D VA N C E D FUNCTIONS three times and then press ENTER.

Enter Sub-Address

_

5 Use the numeric keypad to enter the appropriate sub-address in the remote machine. In this example, we ve entered 123456.

Enter Sub-Address 123456_

Note: If you make a mistake, press CANCEL to erase the character, then enter the correct number.

6 Press ENTER.The LCD shows:

Enter Password

_

Note: If this sub-address does not have a password, skip to step 8.

11 Press A D VA N C E D FUNCTIONS,ENTER.The LCD shows:

Delayed

Enter Time: 15/17:05

12 Use the numeric keypad to enter the day and time when the transmission should begin, then press ENTER.

13 Press

3.33