Muratec MFX-1300/1700 manual Type Communication Enter, P2Fax#/Advan.Func 5558743, Option Off Enter

Advanced features
5 Press until			Communication appears.
		Type :Communication
				/ /Enter
6 Press ENTER.The LCD now shows either:
		P2:Fax#/Advan.Func.			or	P2:Fax#/Advan.Func.
		_				9-5558743_
7
	Use the numeric keypad to enter up to 230 fax numbers you can use any com-
	bination of call groups, one-touch keys, speed-dial numbers and manually-dialed
	numbers.
	Important:		Do not press ENTER.
	Press BROADCAST to enter a comma between each number or call group.
	Important:		Do not insert a comma afterthe last number.
	To enter a speed-dial number, press SPEED DIAL/TEL INDEX and the number s three-
	digitidentifier.
	To enter a call group, press G R O U P DIAL and the group s identifier number.
		P2:Fax#/Advan.Func.
		G5,G7,[01],S006,9-55
	Your display can show only 20 characters at a time. To view characters beyond
	those 20, press to scroll to the leftor					to scroll to the right.
8	If you want the broadcast to begin immediately every time you press the key,
	press ENTER and skip to step 11.
	If you want to delay the broadcast, press A D VA N C E D FUNCTIONS,ENTER.
9 Next, tell your fax to carry out this delayed command one of these ways:
	Option 1:		Perform the command once at a certain time on a certain day of
			the month. (For example, Do this at 5:05 P M on the 30th. )
			To select this option, use the numeric keypad to enter the date and
			time when the fax should perform the command:
				Delayed
				Enter Time: 30/17:05

Option 2: Perform the command at a certain time each day you press the key.(For example, Do this at 5:05 P M today.)

To select this option, use the numeric keypad to enter 0,0 and then the time the fax should perform the command:

Delayed

Enter Time: 00/17:05

10	Press ENTER,ENTER.
11	The LCD asks if you want to make additional settings for this programmable one-
	touch number.
		Option			:Off
				/	/Enter
	Ifyou do not want to make additional settings, press ENTER.Then skip to step 23.
	Ifyou do want to make additional settings, press					and ENTER.
12	The LCD asks which resolution you want to use for this programmable one-touch
	number.
		Resolution			:------
				/	/Enter
13
	Press		until the mode you want appears.
	Note:		For any of the following settings, choose			----- if you do not want to spec-
			ify the displayed setting for this programmable one-touch key.
14	Press ENTER.The LCD asks you to select a contrast mode for each programmable
	one-touch number.
		Contrast		:-------
				/	/Enter
15
	Press		until the mode you want appears.
16	Press ENTER.The LCD asks you for the type of confirmation report you want to set
	for this programmable one-touch number.
		Report			:---
				/	/Enter
17
	Press		until the mode you want appears.

3.38