Printing a list of the blocked numbers

Advanced features

4 Depending on if you have already entered at least one number into the blocked numbers list, the LCD shows one of the following:

Enter Fax Number	or	Select BlockJunk No.
01:_	or	01:555-2971

5 If you want to modify an existing entry in the blocked numbers list, press or until you see the number you want to modify.

If you want to enter a new number in an already-started blocked numbers list, press or until you find an empty position in the list.

Then press ENTER to enter or modify the blocked number.

Note: To clear a number from the list, see Clearing a number from the blocked numbers list, right column.

6 Use the numeric keypad to enter the last eight characters of a fax number you want to block. For example, if you want to block a fax from someone with a Subscriber ID of 972-555-3038, you should enter 5,5,5, DIALING OPTIONS,3,0,3, 8:

Enter Fax Number 01:555-3038_

To change a specific digit, press to move leftor to move right until the cur- sor is under the digit, then use the numeric keypad to enter the correct number.

7 Press ENTER to save the setting. The LCD shows the next slot in the blocked numbers list.

Ifyou do not want to enter or change a number for this slot, go on to step 8. Ifyou do want to enter or change a number for this slot, repeat steps 5 7.

8 Press STO P.Your machine will return to standby mode.

Clearing a number from the blocked numbers list

To clear a number from the list:

1 Press Program key,B,2,1,0,ENTER.

If your Block Junk Fax setting is either Mode2 or Mode3, skip to step 3.

Block Junk Fax:Off / /Enter

2 Press or until you see your preference, Mode2 or Mode3.

Block Junk Fax:Mode2 / /Enter

3 Press ENTER.The LCD shows:

Select BlockJunk No. 01:555-2971

4 Press or until you see the number you want to clear.

5 Press CANCEL to clear the number.

To clear another number from the blocked numbers list, repeat steps 4 5. Otherwise, go on to step 6.

6 Press STO P to return your machine to standby mode.