Basic operation

3 If you want to cancel the command shown, press CANCEL.The LCD shows:

C01:9-5552311

Check

/ / /Cancel

4 To go ahead with canceling the command, press CANCEL again. Go back to step 2 to view other delayed commands.

To keep this command but to continue reviewing stored commands, press or

.Go back to step 2.

To keep this command and stop reviewing commands, press STO P to return your machine to standby mode.

Note: See also Reviewing or canceling parts of a broadcast, below.

Reviewing or canceling parts of a broadcast

You also can review or cancel certain numbers within a broadcast:

1

Press C O M M.CANCEL/CONFIRM.

2

Press

or

to scroll through currently stored broadcast command.

 

Note:

Stop this operation at any time by pressing STO P.

 

 

 

 

 

C01:Broadcast

 

 

 

 

 

/ /

/Cancel

 

3

 

 

 

If you want to cancel the command shown, press CANCEL,CANCEL.

 

If you want to review individual numbers within this broadcast, go on to

 

step 4 without pressing CANCEL.

4

To review individual numbers within this broadcast, press (or BROADCAST)to

 

see the first number.The LCD shows:

 

 

9-5550388

 

 

 

 

 

 

/ /

/Cancel

 

5

 

 

 

 

 

Press

or

until you find the number you want to cancel.

6

Press CANCEL,CANCEL.The next number will appear.

If you want to cancel this number, also, repeat this step.

If you want to cancel a different number, go back to step 5.

If you want to go back to reviewing or canceling other command, press .

If you don t want to cancel any more numbers, press STO P.The machine returns tostandby mode.

Printing a delayed command list

Your machine can print a command list which tells you:

The command s identification number

The phone number, or remote location

The start time (this appears in a D D,H H:M M format)

Anote telling if the command is a polling or F-Code operation (see pages 3.14 3.15 for more on polling and 3.25 3.34 for more on F-Code communication).

To print a delayed command list, press Program key,E,1,0,5 ENTER.

Printing a stored document

Your fax machine can print out each document stored for delayed transmission.

To print a stored document, you ll need to know the document s command number, which you can get by either reviewing the commands or printing a delayed command list (see above).

1 Press Program key,D,3,0,5 ENTER.The LCD shows:

Com. Stored Doc.

Command No. :_

2 Use the numeric keypad to enter the command s identification number,1 99.For example, we could enter the following for the very first command, 1:

Com. Stored Doc.

Command No. :1_

3 Press ENTER.Your fax machine will print a copy of the stored document.

2.8

Page 39
Image 39
Muratec MFX-1300/1700 manual Printing a delayed command list, Printing a stored document, C01Broadcast Cancel