Muratec MFX-1300/1700 manual Programming a batch transmission, Resolution Enter, Contrast Enter

Advanced features

Programming a batch transmission

For this operation to work, two things must be true:

The batch box you re using must exist on your fax machine.

You must know the batch box s identifier number (1 5).

To program a batch transmission into a programmable one-touch key:

1 Press Program key,A,3,0,1, ENTER.The LCD shows the first empty programma- ble one-touch number available:

Select Program No.

P2:No Number Stored

Note: IfP2 appears on the LCD, it means that you have already entered a num- ber for P1.You can see what you programmed into P1 by pressing ,if you want. For example, if you set P1 for storing of the polling document, you will see:

Select Program No.

P1:Polling Document

Press to go back to the programmable one-touch key you want to enter.

Note: To erase a programmable one-touch key, see page 3.48.

2 Press the key that you want to program or change. Here, we ve selected P2.

Select Program No.

P2:No Number Stored

Note: If your previous command for this key was for a batch transmission and you want to keep this key programmed for a batch transmission, use these instructions to make changes. But if you want to assign this key to a completely different operation (for a delayed transmission, for exam- ple), then you first must erase the stored command before programming the new one.

3 If you want to select a different programmable one-touch key than the one that appears on the LCD, press that key now.

4 Press ENTER.The LCD asks which operation you want to program into the pro- grammable one-touch:

Type :Communication / /Enter

Note: If changing a previously stored command, skip to step 7.

5 Press until Communication appears.

Type :Communication / /Enter

6 Press ENTER,A D VANCED FUNCTIONS five times and then press ENTER.The LCD shows:

Batch Tx

Enter Box No. :_

7 Use the numeric keypad to enter the one-digit identifier for the batch box you want to assign to this one-touch key. Here, we ve entered 5:

Batch Tx

Enter Box No. :5

Note: To change an identifier already entered, press CANCEL toeraseit. Then re-enter the correct identifier.

8 Press ENTER.The LCD asks if you want to make additional settings for this pro- grammable one-touch number.

Option	:Off
/	/Enter

Ifyou do not want to make additional settings, press ENTER.Skip to step 16. Ifyou do want to make additional settings, press and ENTER.

9 The LCD asks which resolution you want to use for this programmable one-touch number.

Resolution :-----

/ /Enter

10 Press until the mode you want appears.

Note: For any of the following settings, choose ----- if you do not want to spec-

ify the displayed setting for this programmable one-touch key.

11 Press ENTER.The LCD asks you to select a contrast mode for each programmable one-touch number.

Contrast	:-------
	/ /Enter

12 Press until the mode you want appears.

3.44