Muratec MFX-1300/1700 manual P2Machine Settings Enter, Programming a document storage operation

If you want to select a different programmable one-touch key than the one that appears on the LCD, press that key now.

Advanced features

6	Press ENTER.The LCD asks which list you want to program into the programmable
	one-touch:
		P2:Machine Settings
		/ /Enter
7
	Press until the list you want appears.
8	Press ENTER.
9	Press STO P to return your machine to standby mode.

Programming a document storage operation

If you want to program a programmable one-touch key to store an F-Code polling docu- ment, two things must be true:

The F-Code bulletin box must exist on your fax machine.

You must know the F-Code bulletin box s two-digit number (01-50) and name.

To program your programmable one-touch to store a regular polling document or F-Code polling document:

1 Press Program key,A,3,0,1, ENTER.The LCD shows the first empty programma- ble one-touch number available:

Select Program No.

P2:No Number Stored

Note: IfP2 appears on the LCD, it means that you have already entered a num- ber for P1.You can see what you programmed into P1 by pressing ,if you want. For example, if you set P1 for storing of the polling document, you will see:

Select Program No.

P1:Polling Document

Press to go back to the programmable one-touch key you want to enter.

Note: To erase a programmable one-touch key, see page 3.48.

2 Press the key that you want to program or change. Here, we ve selected P2.

Select Program No.

P2:No Number Stored

Note: If your previous command for this key was to store a document and you want to keep this key programmed to store a document, use these instructions to make changes. But if you want to assign this key to a com- pletelydifferent operation (for a delayed transmission, for example), then you first must erase the stored command before programming the new one.

3

4 Press ENTER.The LCD asks which operation you want to program into the pro- grammable one-touch:

Type :Communication / /Enter

Note: If changing a previously stored command, skip to step 7.

3.46