Muratec MFX-1300/1700 manual Redialing, Tel Mode, View Redial History

STO P

Basic operation

12 At the end of the operation, your fax machine beeps and displays:

919725552009

** Complete **

Important: Whenever you transmit a document, what actually appears on the top line of the display depends on information stored in the remote fax. The line may even be blank.

Note: If the call fails, see Redialing, page 2.6.

Sending a fax using MONITO R/CALL key or a handset

You also can fax a document using either the monitor speaker or the optional handset to dial the call.

Note: If you want to use MONITO R/CALL key, you should assign it to a Soft key in advance. (See page 3.16.)

Note: In this function, you cannot send a fax using the FBS glass. 1 Insert the document to the ADF.

2 Adjust resolution and contrast if necessary.

3 Obtain a dial tone, either by:

Pressing MONITO R/CALL

or

Lifting the optional handset. In either case, the LCD shows:

** Tel Mode **

_

4 Enter the fax number by using the numeric keypad.

Also, enter access codes with the number, just as for a regular phone call.

** Tel Mode ** 919725552009_

5 When you hear fax tones from the remote unit, press START.

Note: If a person answers the phone, use the optional handset to tell that per- son that you re trying to send a fax. When you hear fax tones, press

START.

6 If you re using an optional handset, hang up after pressing STA R T.

7 At the end of the operation, your fax machine beeps and displays:

919725552009

** Complete **

Note: If the call fails and you used MONITO R/CALL to dial, press MONITO R/CALL to hang up. Or if you ve pressed STA RT to begin the fax transmission, press

toendit.

Also see Redialing manually, below,ifthecallfails.

Redialing

Automatically fax redialing

If your fax call fails, your machine automatically redials it. In this Auto Redial mode, your fax automatically redials the number up to two times at one minute intervals.

Note: You can change the redial time and interval settings. (See Changing redial set- tings, page 4.5.)

While in the Auto Redial mode, the machine can continue to receive faxes and can make as many as 99 fax transmissions.

Note: If you used either the MONITO R/CALL key or a handset to dial the call, you must redial manually (see below).

Note: If the last redial attempt fails, your machine may print (and/or display) error messages.

Redialing manually

You can always redial calls manually.And you must redial manually if you used either the MONITO R/CALL key or an optional handset to dial the failed call.

Note: To use REDIAL/PAUSE key, you should assign it to a Soft key in advance. (See page 3.16.)

To redial a fax call manually without using the MONITO R/CALL key or an optional handset:

1 Set the document and set the resolution and contrast.

2 Press REDIAL/PAUSE.The LCD will show:

View Redial History 0:1234567890

2.6