Muratec MFX-1300/1700 manual Getting started, Clearing stored settings, Entering initial settings

Getting started

EasyStart (Initialsettings)

EasyStartsoftware is already installed on your Muratec fax machine. It guides you through the process of entering your machine s settings.

These settings you make here can always be changed later.

Getting started

Determine the following before you go any further:

1	The type of dialing your telephone system requires Choose either tone or
	pulse (rotary) dialing.
2	The name and fax number you want to appear on your faxes
	Every fax page you send arrives at the receiving machine with a single line of text

at the very top of the page. Thistextlistsa name, called the Transmit Terminal Identifier(TTI),and a fax number.The TTI cannot be longer than 22 characters.

Clearing stored settings

Before using EasyStart, clear your machine sbuilt-in user data memory.This ensures the memory will hold only your settings.

Important: After you use EasyStart, do not clear the memory again unless an autho- rized technician asks you to do so.

To clear the machine s memory:

1 Press Program key,*,2.The LCD now asks if you want to clear the memory:

Clear User Settings

Check Enter/Cancel

Note: Ifyou don t want to clear the memory, just press CANCEL.

2 Ifyou do want to clear the memory, press ENTER.

Entering initial settings

Important:			If you press STO P during EasyStart, your fax machine returns to standby
			mode (its normal condition). But it will keep the settings you saved by
			pressing ENTER as described in these instructions.
1	Press Program key,I,ENTER.
	The LCD shows the current language setting.
		Language		:English
				/ /Enter
2
	Press		or until the language you want appears.
3	Press ENTER to save the setting and continue EasyStart.
4	The LCD now shows the current calendar/clock setting, with a cursor appearing
	under the first digit.
		Enter Time
			01/01	’01 00:00

5 Use the numeric keypad to enter the correct date and time, using a M M D D Y Y format forthe date and 24-hour format for the time. For instance, to set 8:30 P M on June 11, 2002, press 0 6 1 1 0 2 2 0 3 0, which resultsin:

Enter Time

06/11 ’02 20:30

Note: Your fax machine automatically inserts the spaces and date-slash. All you have to do is enter the digits.

To change a digit, press to move the cursor left,or to move it right. Then enter the correct digit.

6 Press ENTER to save the clock setting and continue.

1.18