Muratec MFX-1300/1700 manual 03Password 123456789*#, 03Password 135*7#9, Box Type Bulletin

12 Next, the machine asks for your F-Code box s password. This is the password for
	ITU-T-compatible F-Code fax transactions. The LCD shows:
		03:Password			or	03:Password
		_				123456789*#_
	Note: You don t need to have a password for the F-Code box. However, using a
			password will make your F-Code communication much more secure.
	Ifyou do not want to enter or change this box s password, skip to step 14.
13	Use the numeric keypad to enter this box s ITU-T-compatible password. This pass-
	word can be up to 20 characters in length and include any combination of
	numbers and the * and # characters (but no other non-numerical characters).
	Here, we ve entered 135*7#9.
		03:Password
		135*7#9_
	Note:		You cannot change the type of an existing F-Code box. If you re modify-
			ing an existing F-Code box and want to change the box type,youfirst
			must erase the old box, then create a new one.
14 Press ENTER to save the password. The LCD now shows:
		Box Type :Bulletin
			/	/Enter
	The fax machine is asking which box type you want to assign to this box bul-
	letin,security or relay.
	Press		or until the type of box you want appears.
15	Press ENTER.
	If you chose Bulletin, go on to step 16.

If you chose Security, skip to step 17.

If you chose Relay, skip to step 20.

If you chose Bulletin:

16 The bulletin box has four additional settings: Reception protection ( Rx Protect on the LCD)

Automatic printing of received documents ( Auto Print )

Overwriting documents ( Overwrite Doc. )

Erasure of transmitted documents ( Erase Tx Doc. )

Advanced features

Rx Protect Reception protection tellsthisboxifit s okay to receive documents from remote locations. Callers can then poll these documents.

Rx Protect	:Off
/	/Enter

On: Do not open this box to receive documents from callers.

Off: Open this box to receive documents from callers.

Press	or	until the mode you want appears.
Then press ENTER to save the setting and go on to the next one.
Auto Print		Automatic printing of received documents tells the fax machine if it

should print a document automatically upon receiving it into this box.

Note: This setting is available only when the reception protection (Rx protect) setting is set to off (see above).

Auto Print	:Off
/	/Enter

On: Print the document automatically when the box receives it.

Off: Print the document manually, when you want to print it.

Press or until the mode you want appears.

Then press ENTER to save the setting and go on to the next one.

Overwrite Doc Overwriting documents tells your machine if it should overwrite (erase) existing documents when it receives a new one.

Note: This setting is available only when the reception protection setting is set tooff(see Rx Protect above).

Overwrite Doc. :Off / /Enter

On: When your machine receives a new document into this box, it will erase any documents currently stored in it.

Off: When your machine receives a new document into this box, it willnot erase the documentsstoredinit. Your machine can store up to 30

documents (each document can include one or more pages) in each box.

Press or until the mode you want appears.

Then press ENTER to save the setting and go on to the next one.

3.27