Muratec MFX-1300/1700 manual Stacking multiple copies, Sorting multiple copies using ADF

Stacking multiple copies

1	Press C O P Y/FA X to change to Copy mode.
2	Press SORT to turn the sort setting off.
	Note:	The default setting of sorting is On.To change the default setting, see
		page 4.7.
3	Place your original document in ADF face up, or on the FBS glass face down just
	as you would to send a fax.
4	Enter the document size by pressing the D O C U M E N T SIZE.
5	Using the numeric keypad to enter the number of copies you want (up to 99).
6	As needed, set the following:
	Select document type and adjust image contrast
	Set copy reduction or enlargement ratio
	Note:	For details about each items, see Making copy settings, pages
		2.15 2.16.
7	Press START.
Note:	To stop the copying, press STO P.
Sorting multiple copies (using ADF)
Note:	You cannot use the FBS glass for sorting multiple copies.
1	Press C O P Y/FA X to change to Copy mode.
2	Make sure the LED on SORT glows, which means the sort setting is turned on.
	Note:	If it does not glow, press SORT toturniton.
3	Place your original document in ADF face up, just as you would to send a fax.
4	Set the document size by pressing the D O C U M E N T SIZE.
5	Using the numeric keypad to enter the number of copies you want (up to 99).
6	As needed, set the following:
	Select document type and adjust image contrast
	Set copy reduction ratio
	Note:	For details about each items, see Making the copy settings, page 2.15.

Basic operation

7 Press START.

Note: To stop the copying, press STO P.

Enlarged or reduced copies

Your fax machine is capable of enlargement and reduction when copying.

Note: The copy enlargement and reduction rate setting is available only for copying, not for faxing.

Important: Copy enlargement is available only for copying using the FBS;itisnot available for copying using the ADF.

1	Press C O P Y/FA X to change to Copy mode.
2	Place your original document in ADF face up, or on the FBS glass face down just
	as you would send a fax.
	Note: If you want to enlarged copy, use FBS glass.
3	Enter the document size by pressing the D O C U M E N T SIZE.
4	Choose an enlargement or reduction ratio using	or of the cursor key.
	You can reduce to 78%, 64 % or 50 % of the original size
	O R
	You can enlarge to 129% or 200 %
	O R
	Press Z O O M to turn the Z O O M light on, and adjust the ratio at 1% steps using		or
	of the cursor key.You can enter the ratio between 50% and 200%.
	O R

Directly enter any percentage between 50 % and 200 % by following procedure.

1.Press #.

2.Using the numeric key to enter your desired ratio (50 to 200).

3.Press # again.

129%: Half-letter (5.5″ 8.5″)→ Letter (8.5″ 11″)

78%: Legal (8.5″ 14″)→ Letter (8.5″ 11″)

Helpful Tip: You can set the copy reduction or enlargement ratio to Auto . (See Setting copy auto, page 4.7.) If the Auto is set and you set the document size by pressing D O C U M E N T SIZE, the machine automati- cally reduce or enlarge the original size (you entered) to fit on the paper size you selected.

2.13