Advanced features

If you specified real time transmission:

Your fax machine dials the other fax machine.

The LCD shows the Location ID and the document s width and resolution settings:

Plano Office

A4 Normal

Note: If the entry doesn t have a Location ID,the number appears.

When the other machine answers, your fax feeds the document through its scanner, transmitting as it goes. (To review Real time transmission, see page 2.3.)

One-touch phone dialing

Todiala phone call using a one-touch number, you must have an optional handset attached to your machine. (Contact your authorized Muratec dealer to order an optional handset.)

To make the call:

1 Obtain a dial tone by doing one of the following: Lift the handset

Press MONITO R/CALL to use the monitor speaker

2 Press the one-touch key in which you ve stored the number.As the machine dials, it shows the number on the LCD:

** Tel Mode ** 9-555-2842_

Note: Remember that your fax machine s monitor speaker is not a speakerphone. fI you dialed by using the monitor speaker, pick up the handset to speak to the person that answers.

Note: If the call fails, and you used MONITO R/CALL to dial, press MONITO R/CALL to hang up.

Using speed-dial numbers

Your fax machine will store up to 145 speed-dial numbers, designated by three-digit identifier codes from 001 through 145.

Entering or changing a speed-dial number

1 Pressber: Program key,A,2,0,1, ENTER.The LCD shows an empty speed-dial num-

Enter Speed-Dial No.

001:No Number Stored

Note: If a speed-dial number other than 001 appears on the LCD, it means you have already entered a number for 001.

2 Use the numeric keypad to enter the desired speed-dial number s three-digit iden- tifier code. Here, we ve entered 005 and the LCD shows either:

Enter Speed-Dial No.

or

Enter Speed-Dial No.

005:No Number Stored

005:9-555-397-0123

 

 

 

Important: When entering the identifier code for speed-dial numbers less than 100, you must enter leading zeros to make three digits.

For example, 001-099.

3

If you want to select a different speed-dial number, press that number s three-

 

digit identifier code now.That number appears on the LCD.

4

Press ENTER.Depending on whether you already have a number entered for this

 

speed-dial number,the LCD now shows either:

 

 

005:Fax Number

or

 

005:Fax Number

 

 

 

_

 

9-555-397-0123_

 

5

 

 

 

 

 

Use the numeric keypad to enter the number exactly as your machine should dial

 

it, including whatever access codes your phone system requires. (You may want

 

to review Special dialing characters,

page 3.1.)

 

The number can be up to 40 characters in length:

 

 

 

 

 

 

 

 

 

005:Fax Number

 

 

 

 

 

 

9-1-555-567-1234_

 

 

 

 

 

 

 

 

 

 

 

Your display can show only 20 characters at a time. To view characters beyond

 

those 20, press to scroll to the leftor

to scroll to the right.

6

When the number appears as you want it, press ENTER tostoreit.

3.4

Page 57
Image 57
Muratec MFX-1300/1700 Using speed-dial numbers, Enter Speed-Dial No 001No Number Stored, 0059-555-397-0123, 005Fax Number