Muratec MFX-1300/1700 manual Reviewing or canceling commands, View Redial History 01234567890

3 Your machine can remember the last 10 dial numbers. Press or untilthe dial number you want to redial appears.

4 Press START.

To redial a fax call manually with the MONITO R/CALL key or an optional handset:

1 Makeset. sure the document is in the ADF and that the resolution and contrast are 2 Press MONITO R/CALL orlift the optional handset to get a dial tone.

Note: If you want to use MONITO R/CALL key, you should assign it to a Soft key in advance. (See page 3.16.)

3	Press REDIAL/PAUSE.The LCD will show:
		View Redial History
		0:1234567890
4
	Your machine can remember the last 10 dial numbers. Press or untilthe
	dial number you want to redial appears.
5	When you hear fax tones from the remote unit, press STA RT.
	Note: If a person answers the phone, use the optional handset to tell that per-
		son you re sending a fax. When you hear fax tones, press START.

To redial a voice call manually using the optional handset:

1 Lift the optional handset to get a dial tone.

2 Press REDIAL/PAUSE.The LCD will show:

View Redial History 0:1234567890

3 Your machine can memory the latest 10 dial numbers. Press or untilthedial number you want to redial appears.

4 Press START.

When the other person answers, use the optional handset to speak to that per- son.

Basic operation

Reviewing or canceling commands

Your fax machine can store many jobs in its memory.And it keeps track of each one by assigning it a command number, like C01.

Delayed commands, redial attempts and current fax transmissions are all stored in your fax machine s memory and given a command number.Your machine can store up to 99 delayed commands. It identifies each by a two-digit command number ranging from 01 to 99.

The Review Commands function gives you the power to check on each job (or command) in your machine s memory.Italsolets you cancel a command if you decide not to send the document.

To see your machine s stored commands or to cancel them:

1 Press C O M M.CANCEL/CONFIRM.The LCD will show:

C01:5552009

/ / /Cancel

The LCD shows the first command, indicated by its command number and the phone number it will dial.

If your machine is attempting to perform a command now, it appears on the display.

Note: If there are no stored commands in your machine, the LCD will show:

No Command

Press STO P to return to standby mode.

Or, if you want to see the result of fax transaction, press C O M M. CANCEL/CONFIRM.(See View the result of fax transaction on page 2.9.)

Here, you see command 01, followed by the number it s set to dial. If the com- mand is to send a broadcast, Broadcast appears instead of the phone number. (See Broadcasting, page 3.9.)

If the command is to send a batch transmission, the LCD shows its batch box number (such as B01 ) rather than the command number. (See Batch transmis- sion, pages 3.11 3.13.)

If the command is for a Call group dialing, the group number (such as G01 ) appears instead of the phone number. (See Call group dialing, page 3.7.)

2 Press or to scroll through currently stored commands.

2.7