Muratec MFX-1300/1700 manual Using the bypass tray, Copy Ready Ltr Ltr 100%

Basic operation

5 As needed, set the following:

Select document type and adjust image contrast

Enter the number of copies

6 Press STA R T.

Note: To reset the copy parameter to default setting, press C O P Y RESET.

Note: To stop the copying, press STO P.

Using the bypass tray

When you need to use a size of paper not currently loaded in your machine s paper cas- sette(s), or when you want to use a special type of paper (such as transparency film), use the bypass tray.

Important: If loading transparency (OHP) film into the bypass tray, be sure that the

	sheet is designed for laser printers and not for copiers. Also, be sure that
	the film does not have a paper backing and/or a leading strip. If it does,
	remove the paper backing and/or strip before inserting. Only film should
	go in, not film with any backing or strip.
1	Either insert the document in the ADF or place it on the FBS glass.
2	Set the paper in the bypass tray.
	See the table of Acceptable paper size and cassette capacity on page 1.8 and

Loading paper in bypass tray on page 1.10 for more information.

Note: Place the original document in the same orientation as the paper in the paper source.

3 The machine will select the bypass tray for the paper source and the LCD will show the default paper size you have set in step 6 on page 1.10.

If you want to change it, proceed to step 4. Otherwise, skip to step 10.

Copy Ready	1
[ Ltr ] Ltr	100%

4 Press BYPAS S to change the paper size. The LCD will show:

Set Bypass Ppr:Ltr / /Enter

5	If your recording paper on the bypass tray is Letter, Legal or Half-letter, proceed
	to step 6. Otherwise, skip to the step 7.
	Note:		When you use transparency film, skip to step 8 and select OHP in step
			9.
6	Press		or	until your desired recording paper size appears. Here, we ve cho-
	sen Legal:
		Set Bypass Ppr:Legl
				/ /Enter
	Skip to step 9.
7	Press		or	until Other appears.
		Set Bypass Ppr:Other
				/ / /Enter
	Then press			or ENTER.You will see:
		Set Bypass Ppr:Exe
				/ / /Enter
8
	Press		or	until your desired recording paper size appears. Here, we ve cho-
	sen Postcard:
		Set Bypass Ppr:Post
				/ / /Enter
9
	Press ENTER.
10	If necessary, select desired resolution, contrast, reduction/enlargement ratio.
11	Press START to begin the copying process.

2.14