Muratec MFX-1300/1700 Settings for copying, Copy scan settings, Adjusting the copy print settings

Changing the default settings

Settings for copying

Copy scan settings

Default setting: Primary document type: Text, Primary contrast: Normal

Two different settings tell your machine how to scan documents. The initial factory set- tings are probably right for most applications, so try using them before changing any of these settings:

Primary document type Sets the document type for your documents. Choose either Text, Text&Photo, or Photo.

Primary contrast Sets how light or dark you want copied documents to be.

Note: These primary settings you choose effect your copy activity only.

To set these modes:

1 Press Program key,B,3,0,1, ENTER.The LCD asks you to select a resolution:

Doc. Type:Text

/ /Enter

2 Press or until the mode you want appears. In this example, we ve chosen

PHOTO .

Doc. Type:Photo

/ /Enter

3 Press ENTER to save the setting. The LCD asks you to select a contrast setting:

Contrast	:Normal
	/ /Enter

4 Press or until the mode you want appears. In this example, we ve chosen light contrast.

Contrast :Light / /Enter

5 Press ENTER to save the setting.

By following the steps above, you ve set your defaults for scanning. Before copying doc- uments, you can override these default scan settings for that copying.

To override the default document type and contrast settings before copying a document:

Press D O C U M E N T to change the document type.

Press CONTRAST to change the contrast.

Once your document is copied, your machine returns to its default settings.

Adjusting the copy print settings

Default setting: Margin: 24 mm

Your machine s print margin for copying is measured in millimeters (mm). Welldefine print margin by explaining how it s used:

When an original document is scanned, the machine measures the document s length and comparesitto (a) the length of your selected paper (not include the print margins) plus (b) the print margin you set. If the length of the document is longer than (a) and (b) put together, your machine prints the document on more than one sheet.

Note: A print margin setting of 24 mm will print most documents as single pages. Try this combination first and then, only if you have problems with it, select different settings.

1 Press Program key,B,3,0,2, ENTER.The LCD shows the current print margin for copying:

		Margin
		(00-85mm):24
2
	Use the numeric keypad to enter the print margin you want. If necessary, press
	or to move the cursor. In this example, we ve chosen 20mm.

Margin

(00-85mm):20

3 Press ENTER to save the setting.

4.6