Muratec MFX-1300/1700 manual Quick Memory transmission, TTI transmission

Changing the default settings

Memory transmission

Default setting: On

Note: When the machine s memory is full, it can transmit only through the document feeder (real time transmission).

Note: When you use the FBS glass, the machine always uses memory transmission even if you set the memory transmission to off.

To change the default setting of memory transmission:

1 Press Program key,B,2,0,6, ENTER.

Memory Tx	:On
/	/Enter

2 Press or until the mode you want appears. In this example, we ve chosen Off.

Memory Tx	:Off
/	/Enter

3 Press ENTER to save the setting.

Quick Memory transmission

Default setting: On

Important: Your fax machine s memory transmission feature must be turned on to use Quick Memory transmission (see above).

To change the default setting of Quick Memory transmission:

1 Press Program key,B,2,0,7, ENTER.The LCD shows:

Quick Tx	:On
/	/Enter

2 Press or until the mode you want appears. Here, we ve chosen Off.

Quick Tx	:Off
/	/Enter

3 Press ENTER to save the setting.

TTI transmission

Default setting: On

Every fax page you send arrives at the receiving machine with a single line of text at the very top of the page. Thistextlists a name, called the Transmit Terminal Identifier (TTI), and a fax number.You can set the machine to not send the TTI.

1 Press Program key,B,2,0,8, ENTER.The LCD shows:

TTI Tx	:On
/	/Enter

2 Press or until the setting you want appears. In this example, we ve chosen Off.

TTI Tx	:Off
/	/Enter

3 Press ENTER to save the setting.

4.2