Muratec MFX-1300/1700 manual Making copies, Your machine s copier features, Basic copy procedure

Basic operation

Making copies

Your machine s copier features

Your machine has the following copier features:

Single copy (see the right column on this page)

Stacking multiple copies (see page 2.13)

Sorting multiple copies (see page 2.13)

Enlarged or reduced copies (see page 2.13)

Negative/positive copy (Reverse black and white areas) (see page 2.17) Combine copy (only for MFX-1700) (see page 2.17)

Ultra copy mode (only for MFX-1700) (see page 2.18)

Basic copy procedure

1	Press C O P Y/FA X to change to	COPY/FAX key
	Copy mode.

When the machine is in the Copy mode, the LCD shows:

￿￿￿￿￿￿￿ ￿￿￿￿ Number of copies

Copy reduction or enlargement ratio

Recording paper size

Document size

Note: For details about each item, see Making copy settings, pages 2.15 2.16

2	Place your original document in ADF face up, or on the FBS glass face down just
	as you would to send a fax.
3	Enter the document size by pressing the D O C U M E N T SIZE.
4	As needed, set the following:
	Select document type and adjust image contrast
	Enter the number of copies
	Set copy reduction or enlargement ratio
	Note:	For details about each item, see Making copy settings, pages
		2.15 2.16.
5	Press START.
Note:	To reset the copy parameter to default setting, press C O P Y RESET.
Note:	To stop the copying, press STO P.
Single copy
1	Press C O P Y/FA X to change to Copy mode.
2	Place your original document in ADF face up, or on the FBS glass face down just
	as you would to send a fax.
3	If you are using FBS glass, enter the document size by pressing the
	D O C U M E N T SIZE.
4	As needed, set the following:
	Select document type and adjust image contrast
	Set copy reduction or enlargement ratio
	Note:	If you want to enlarge copy, use the FBS glass.
5	Press START.

2.12