Muratec MFX-1300/1700 manual Code polling, FA X to switch the machine to Fax mode, Press

Advanced features

If in step 10 you chose an immediate transmission, your fax machine begins dialing. If you chose a delayed command, the machine shows Reserved on the LCD, indicating that it has stored the command in memory and will complete it later.

F-Code polling

1	Press	FA X to switch the machine to Fax mode.
2	Press	A D VA N C E D FUNCTIONS four times and then press ENTER.

Enter Sub-Address

_

3 Use the numeric keypad to enter the appropriate sub-address. In this example, we ve entered 123456.

Enter Sub-Address 123456_

Note: If you make a mistake, press CANCEL to erase the character, then enter the correct number.

4 Press ENTER.The LCD shows:

Enter Password

_

Note: If this sub-address does not have a password, skip to step 6.

5 Use the numeric keypad to enter the password. In this example, we ve entered 654321.

Enter Password 654321_

6 Press ENTER.The LCD shows:

Enter Fax Number

_

7 Enter the fax number either by pressing a one-touch key, entering a speed-dial number or dialing from the numeric keypad. Do not press STA R T.

8 What you do now depends upon when you want the polling to begin. To have it begin now, skip to step 11.

To delay it, go on to step 9.

9 Press A D VA N C E D FUNCTIONS,ENTER.The LCD shows:

Delayed

Enter Time: 15/17:05

10 Use the numeric keypad to enter the day and time when the polling should begin, then press ENTER.

11 Press START.

If in step 8 you chose an immediate polling, your fax machine begins dialing. If you chose a delayed command, the machine shows Reserved on the LCD,indicatingthatit has stored the command in memory and will complete it later.

3.34