Muratec MFX-1300/1700 manual Contrast, Memory Tx, Report, Programming F-Code polling

Advanced features

18	Press ENTER.The LCD asks you to select a contrast mode for each programmable
	one-touch number.
		Contrast		:-------
				/	/Enter
19
	Press		until the mode you want appears.
20	Press ENTER.The LCD asks if you want the memory transmission on or off when
	using this programmable one-touch number.
		Memory Tx			:---
				/	/Enter
21
	Press		until the mode you want appears.
22	Press ENTER.The LCD asks you for the type of confirmation report you want to set
	for this programmable one-touch number.
		Report			:---
				/	/Enter
23
	Press		until the mode you want appears.
24	Press ENTER.The LCD asks if you want to send a cover page for this programma-
	ble one-touch number.
		Cover Page			:---
				/	/Enter
25
	Press		until the mode you want appears.
26	Press ENTER.The LCD asks if you want to turn the Fax & Copy feature on or offfor
	this programmable one-touch number.
		Fax & Copy			:---
				/	/Enter
	Note:		When the memory transmission is set to off in step 20, this LCD willnot
			appear and go to step 29.
27	Press		until the mode you want appears.
28	Press ENTER.
29	Press STO P to return your machine to standby mode.

Programming F-Code polling

For this operation to work, two things must be true:

The document which you re polling must exist in the remote fax s F-Code box (ITU-Tstandard sub-addressing/password box).

You must know the remote fax s ITU-Tsub-address and password (if any) for each box you want to poll.

To program an F-Code polling operating into a programmable one-touch key:

1 Press Program key,A,3,0,1, ENTER.The LCD shows the first empty programma- ble one-touch number available:

Select Program No.

P2:No Number Stored

Note: IfP2 appears on the LCD, it means that you have already entered a num- ber for P1.You can see what you programmed into P1 by pressing ,if you want. For example, if you set P1 for storing of the polling document, you will see:

Select Program No.

P1:Polling Document

Press to go back to the programmable one-touch key you want to enter.

Note: To erase a programmable one-touch key, see page 3.48.

2 Press the key that you want to program or change. Here, we ve selected P2.

Select Program No.

P2:No Number Stored

Note: If your previous command for this key was for an F-Code polling opera- tion and you want to keep this key programmed for an F-Code polling operation, use these instructions to make changes. But if you want to assign this key to a completely different operation (for a delayed trans- mission, for example), then you first must erase the stored command before programming the new one.

3 If you want to select a different programmable one-touch key than the one that appears on the LCD, press that key now.

4 Press ENTER.The LCD asks which operation you want to program into the pro- grammable one-touch:

Type :Communication / /Enter

3.42