Muratec MFX-1300/1700 manual Resolution Enter, Contrast Enter, Memory Tx Enter

Advanced features

4 Press ENTER.The LCD asks which operation you want to program into the pro- grammable one-touch:

Type :Communication / /Enter

Note: If changing a previously stored command, skip to step 7.

5 Press until Communication appears.

Type :Communication / /Enter

6 Press ENTER.The LCD now shows either:

P2:Fax#/Advan.Func.	or	P2:Fax#/Advan.Func.
_		9-5558743_

7 Use the numeric keypad to enter the number exactly as your machine should dial it, including whatever codes your phone system requires. The number can be up to 40 characters in length:

P2:Fax#/Advan.Func. 9-5550629_

Your display can show only 20 characters at a time. To view characters beyond those 20, press to scroll to the leftor to scroll to the right.

Important: Do not press ENTER.

8 Now,while you can still see the fax number on the LCD,press

A D VA N C E D FUNCTIONS,ENTER.The LCD shows:

Delayed

Enter Time: 11/20:30

9 Next, tell your fax to carry out this delayed command one of these ways:

Option 1: Perform the command once at a certain time on a certain day of the month. (For example, Do this at 5:05 P M on the 30th. )

To select this option, use the numeric keypad to enter the date and time when the fax should perform the command:

Delayed

Enter Time: 30/17:05

Option 2: Perform the command at a certain time each day you press the key.(For example, Do this at 5:05 P M today.)

To select this option, use the numeric keypad to enter 0,0 and then the time the fax should perform the command:

Delayed

Enter Time: 00/17:05

10 Press ENTER,ENTER.The LCD asks if you want to make additional settings for this programmable one-touch number.

Option	:Off
/	/Enter

Ifyou do not want to make additional settings, press ENTER.Then skip to step 24. Ifyou do want to make additional settings, press and ENTER.

11	The LCD asks which resolution you want to use for this programmable one-touch
	number.
		Resolution			:------
				/	/Enter
12
	Press		until the mode you want appears.
	Note:		For any of the following settings, choose ----- if you do not want to spec-
			ify the displayed setting for this programmable one-touch key.
13	Press ENTER.The LCD asks you to select a contrast mode for each programmable
	one-touch number.
		Contrast		:-------
				/	/Enter
14
	Press		until the mode you want appears.
15	Press ENTER.The LCD asks if you want the memory transmission on or off when
	using this programmable one-touch number.
		Memory Tx			:---
				/	/Enter
16
	Press		until the mode you want appears.

3.36