Muratec MFX-1300/1700 manual Installed, the bypass tray and Auto select mode, Ings

Basic operation

Recording paper size

As default, your machine selects the paper source automatically, however if you wish to select the paper source manually, press PAPER SIZE repeatedly until your desired paper size is displayed. The LCD toggles the paper size in the 1st cassette, 2nd cassette (if

Adjust image contrast

Setting the contrast allows you to compensate for any excessive light or darkness, of the document pages you are copying.

installed), the bypass tray and Auto select mode.

Note: If the bypass tray has no paper,the LCD shows None for the paper size of the bypass tray.

Note: When you choose the auto paper select mode, the LCD shows Auto and the all LED of the paper source will be lit.

However,ifthebypass tray has no paper and the optional 2nd paper cassette has not been installed,

the machine will show the [(paper size)] instead

of Auto although you select auto paper select mode. And it lights the LED of the paper source that can be used only.

Select Document type

	PHOTO
PHOTO Select this mode when copying photographs or draw-	PHOTO
ings.	/TEXT
	TEXT
PHOTO /TEXT Select this mode when copying documents con-
taining photographs or drawings with letters.	DOCUMENT
TEXT Select this mode when copying letters.	RESOLUTION
To select the document type, press D O C U M E N T repeatedly.
A glowing LED indicates the machine is using the setting named by that LED.

To change the contrast setting, press CONTRAST repeatedly.

A glowing LED indicates the machine is using the setting named by that LED.

Note: To avoid confusing the Light and Dark settings, just remember Light lightens and Dark darkens to keep it straight.

DARK

NORMAL

LIGHT

CONTRAST

2.16